86mm Magnetic 4-in-1 Lens Filter Kit (MCUV+CPL+ND1000+Adapter Ring+Filter Pouch)
SKU: SKU.1686
A
Hi, you can attach center-pinch lens cap on this filter , except the ND1000 filter , the CPL, UV and magnetic adapter ring can attach lens cap.
A
Hi, you can attach center-pinch lens cap on this filter , except the ND1000 filter , the CPL, UV and magnetic adapter ring can attach lens cap.
A
Hi, you can attach center-pinch lens cap on this filter , except the ND1000 filter , the CPL, UV and magnetic adapter ring can attach lens cap.
A
No, the screwing UV and magnetic ring, only one can be selected; then add the CPL & ND as you like; when megnetic ring and uv used together, it will fall off easily.
A
No, the screwing UV and magnetic ring, only one can be selected; then add the CPL & ND as you like; when megnetic ring and uv used together, it will fall off easily.
A
No, the screwing UV and magnetic ring, only one can be selected; then add the CPL & ND as you like; when megnetic ring and uv used together, it will fall off easily.
A
Hello! If you use the magnetic UV filter separately, or use the magnetic adapter ring together with the CPL filter, you can use a normal lens hood on it. Does not require a larger thread.
If you use the magnetic adapter ring together with the ND1000 filter, you cannot use another lens hood on it.
A
Hello! If you use the magnetic UV filter separately, or use the magnetic adapter ring together with the CPL filter, you can use a normal lens hood on it. Does not require a larger thread.
If you use the magnetic adapter ring together with the ND1000 filter, you cannot use another lens hood on it.
A
Hello! If you use the magnetic UV filter separately, or use the magnetic adapter ring together with the CPL filter, you can use a normal lens hood on it. Does not require a larger thread.
If you use the magnetic adapter ring together with the ND1000 filter, you cannot use another lens hood on it.
A
We installed it on our Canon RF 24-105 lens and it was possible to use the lens hood on this lens because the lens hood attaches to the lens via the bayonette mount which is on the outside of the lens diameter and the magnetic filter adapter screws into the thread on the inside of the lens.
Top Bestselling Products
Related Articles
