Reviews
Good TRIPOD to start photography
Small tripod from K&F Concept.
First, we receive the tripod in its storage bag. The bag is 50cm long. A priori, it looks of good quality and in addition the bottom is reinforced, thick enough to prevent shocks. You can carry it with the small handles or you can equip it with the shoulder strap. There is also a small velvet bag that is provided.
In terms of weight, it weighs 1kg 280g on my scale.
The tubes, the branches are made of aluminum alloy with magnesium, which is supposed to make the material resistant to corrosion and abrasion.
On one of the branches, we have a small non-slip sponge, which is rather comfortable to handle and it is true, outside, the metal can be very cold, and there, suddenly, we will be able to wear it there.
In terms of use, it's quite simple. At the top of each branch, we have the angle adjustment. So there are three positions.
You can also flip the column to do a low-level, macro shot. You just have to unscrew the small hook with the rubber. We take out the column, and put it upside down.
There is also a small support hook to weight the tripod.
At maximum height, when all 3 sections are extended and set to the first position, with the lowest angle, the tripod rises, from the ground to the top of the fluid head, at 159cm.
On the ball joint side, there are two steering clamps. The first is pan rotation. Besides, there is a scale of values. So it can be landmarks, for example to take a panoramic photo.
Also when it is loosened, there is a resistance friction effect. So it can also allow video to make fairly fluid panning movements.
Then, the second tightening above, controls the ball joint and we also have the small notch for the 90° portrait mode; it's always a pleasure.
And then above, classic, we have the fast plate. You have to unscrew to release it. Also there is the small tightening aid, it is very practical. It avoids using a coin or damaging your thumb.
And then there is also the small spirit level.
If you don't like the ball joint, you can replace it. We can unscrew it. Then we have a 3/8'' screw, and then there, we can mount a new ball joint.
It's been a few months now that I use it for photo and video. No particular concerns so far. A good little tripod, for a first purchase. I recommend.
First, we receive the tripod in its storage bag. The bag is 50cm long. A priori, it looks of good quality and in addition the bottom is reinforced, thick enough to prevent shocks. You can carry it with the small handles or you can equip it with the shoulder strap. There is also a small velvet bag that is provided.
In terms of weight, it weighs 1kg 280g on my scale.
The tubes, the branches are made of aluminum alloy with magnesium, which is supposed to make the material resistant to corrosion and abrasion.
On one of the branches, we have a small non-slip sponge, which is rather comfortable to handle and it is true, outside, the metal can be very cold, and there, suddenly, we will be able to wear it there.
In terms of use, it's quite simple. At the top of each branch, we have the angle adjustment. So there are three positions.
You can also flip the column to do a low-level, macro shot. You just have to unscrew the small hook with the rubber. We take out the column, and put it upside down.
There is also a small support hook to weight the tripod.
At maximum height, when all 3 sections are extended and set to the first position, with the lowest angle, the tripod rises, from the ground to the top of the fluid head, at 159cm.
On the ball joint side, there are two steering clamps. The first is pan rotation. Besides, there is a scale of values. So it can be landmarks, for example to take a panoramic photo.
Also when it is loosened, there is a resistance friction effect. So it can also allow video to make fairly fluid panning movements.
Then, the second tightening above, controls the ball joint and we also have the small notch for the 90° portrait mode; it's always a pleasure.
And then above, classic, we have the fast plate. You have to unscrew to release it. Also there is the small tightening aid, it is very practical. It avoids using a coin or damaging your thumb.
And then there is also the small spirit level.
If you don't like the ball joint, you can replace it. We can unscrew it. Then we have a 3/8'' screw, and then there, we can mount a new ball joint.
It's been a few months now that I use it for photo and video. No particular concerns so far. A good little tripod, for a first purchase. I recommend.
05/11/2022
Top Bestselling Products
RED
Dot
Related Articles
