This is a camouflaged camera designed to be strapped to a tree or a post to record the local wildlife covertly. It comes with a fairly long green webbing strap for this purpose as well as an adjustable camera tripod for other mounting options, it has a standard 1/4 tripod thread on the rear and bottom for this or any other camera mounts you may have.It has a small 12 volt dc input at the base hidden under a rubber cover, no power supply is included but that is because it is designed to be used with batteries as there is rarely mains power in the woods where this is designed to be used.Batteries are also not included, you will need 8 x AA batteries but you should get a few months use out of them.The camera is hinged and two catches hold it together, there is also a place to use a padlock to lock it together.Once opened you can see the batter compartment on the rear and the controls and a small led screen to set up the camera and to playback any recordings & to view photos. You can also of course remove the SD card and insert it in a computer. It takes full sized SD cards, I use a 128gb Class 10 card, for hd video recording Class 10 is essential.One odd thing I noticed was you can’t access the menu unless you have a card inserted, no biggy but an unusual one that’s all.In the set up menu aremode selection - photo, video or photo & videophoto size 16mp or 12mpVideo size - 1920x1080 24fps, 1920x1080 15fps, 1280x720, 848x480 or 720 x 480Photo amount - 1 to 9Video length - 10 to 180 secondsInterval timeTimelapse on/offSide PIR on/offVolume Rec on/offAuto Power off - off/3/5/10 minsBacklight timeFlash LightTimerDate & TimeTime FormatTime StampCamera NamePasswordLanguageTV OutForma SD CardReset to FactorySystem Update/InfoAVI files 1920 x 1080 @ 26mbps 24 fpsAudio 128kbps 8,000hz 16 bit mono.1920 x 080@24fps for 30 seconds = 99mb