Polarized Film 300*200mmX1, with a film scraper, two bags of dry and wet cloth alcohol bags, with packaging
SKU: KF31.074
I had ordered the film to replace my burnt out poly filter from the projector. It does exactly what it's supposed to. Thanks to the one-sided adhesive side, it sticks securely to the LCD. It's powerful and tinted enough to protect against the bright LEDs while still polarizing a great image.
So everything is great.
So everything is great.
03/05/2023
Not full polarization, but still usable for my purposes. I don't think these are made accurate enough to work on a screen. They also let about 10% of the light through when they are upright. That means they don't work for the classic blackout experiment. They would probably still be useful for photography and lighting.
You might want to look for something more expensive if you want impressive performance.
You might want to look for something more expensive if you want impressive performance.
02/05/2023
02/05/2023
I used it to invert the colors on my motorcycle counter and the result is great.
Before the background was gray with black writing (like an old calculator) and while shooting the film with the timer on I found the perfect compromise (black background with white writing) for the most beautiful effect.
It cuts very well and sticks well.
Also, delivery was within 24 hours (amazing).
Before the background was gray with black writing (like an old calculator) and while shooting the film with the timer on I found the perfect compromise (black background with white writing) for the most beautiful effect.
It cuts very well and sticks well.
Also, delivery was within 24 hours (amazing).
01/05/2023
This worked fine for me. They block all light that passes through them when two filters are placed at 90 degrees to each other. I'm not sure I like the "sticky" surface that comes automatically to one side of the film, but I'll deal with it. For those who cannot manage to block all light, it is important to note that once light is polarized, it can become unpolarized once it is transmitted through another medium. So if the protective films on the polarizing film are not removed, they will not work properly. The "sticky" side will also only slightly disturb the polarization, so it's important to take this into account in your setup as well.
30/04/2023
Works well for Honda ES 4 wheels. Just a little dimmer than the factory but still bright enough to see. You will get air bubbles as others have said but better than having no display at all. Had to put a piece on the back of the LCD and also on the front to make it work.
30/04/2023
Worked perfectly! The LCD display on this bike melted and looked like cooked bacon...scraped off, found the right angle on the new sheet metal and cut and fitted. Both sides protective films, but only one side is sticky. Worked perfectly and can now read the LCD display again!
10/04/2023
My pool pump's LCD display was unreadable. Scraped off all glue and polarizer with a razor and high proof alcohol. Check the polarizer to make sure the correct angle cut is glued on. Boom works perfect looks brand new
06/04/2023
